Home
Back to Results
Rental 4U W15
When the workload runs hard for the whole deployment, this is the one that keeps going. Built for data analysis, AI, gaming and virtualisation, it packs high-end GPU options into a case engineered to stay quiet and cool under sustained load. Rent it for the project, run it flat out, send it back when the job’s done.
Available from a 4-week minimum term, fully QC tested before it leaves us.
Case Specification
- Size (WxDxH): 430x425x177mm
- Weight: 19 KG
- Hot Swap HDD Bay: No Option
- Power Supply: 1200W 100-240VAC
- PCIE Slots: 3x PCIe Slots
- Front USB: 2x USB3.0
Rental per week from
£174.19 EX. VAT
Minimum 4-week period
Configure
Rental Quote
Spec PDF
Request a Call Back
Rental Quote
Request Custom Quote
Specifications
RAID: RAID 0, 1, 5, 10
DVD: No DVD drive bay
GFX Output: Intel HD Graphics with HDMI Output(s)
GFX Card: Not Quoted - Options Available
LAN: Marvell® AQtion AQC113CS 10Gb (10Gb/s) & Intel i225 (2.5Gb/s)
WLAN: intel Wi-Fi 7 (802.11be)
USB Ports Rear: 1x USB2.0, 6x USB3.2 Gen2
Serial Ports: 1 Optional Ports Available
Expansion Slot 1: PCIe x16 (Full Height) (x16/x8 Lanes, Gen 5.0)
Expansion Slot 2: Empty Slot - Call us for options
Expansion Slot 3: Empty Slot - Call us for options
Expansion Slot 4: PCIe x16 (Full Height)
Expansion Slot 5: Empty Slot - Call us for options
Expansion Slot 6: PCIe x16 (Full Height)
PSU: HPT2-1200M
Thunderbolt: 1x Gen3 Optional Ports Available1x Gen4 Ports
Audio Ports: 2x 3.5mm Ports (Stereo Out, Mic In)
Motherboard I/O Ports:
FAQs
If you have a specific question please contact us on 0333 880 4242.
NUC Environmental Specifications
- Ambient Operating 0°C to +50°C (Local ambient temperature inside the chassis) * Processor performance may automatically decrease when the system operates in the top 5 °C of the ambient operating temperature ranges above.
- Sustained Storage Limits (i.e. warehouse):-20°C to +40°C
- Short Duration Limits (i.e. shipping): -40°C to +60°C
If the external ambient temperature exceeds 40°C, further thermal testing is required to ensure components do not exceed their maximum operating temperature.
Note: The operating temperature of the board may be determined by measuring the air temperature from the junction of
the heatsink fins and fan, next to the attachment screw, in a closed chassis, while the system is in operation.
Note: Before attempting to operate this board, the overall temperature of the board must be above the minimum
operating temperature specified. It is recommended that the board temperature be at least room temperature
before attempting to power on the board. The operating and non-operating environment must avoid condensing
humidity.
View Support Portal